3-conductor shield terminal block; 1.5 mm²; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,50 mm²; white-Tablouri electrice

Ratings per: IEC/EN 60947-7-2;
Tehnologie conexiune: Push-in CAGE CLAMP;
Tip actionare: Push-in;
Open Tool Slot;
Connectable conductor materials: Copper;
Nominal cross-section: 1,5 mm;
Solid conductor: 0,25 2,5 mm / 22 14 AWG;
Solid conductor;
push-in termination: 0,75 2,5 mm / 18 14 AWG;
Fine-stranded conductor: 0,25 2,5 mm / 22 14 AWG;
Fine-stranded conductor;
with insulated ferrule: 0,75 1,5 mm / 18 16 AWG;
Fine-stranded conductor;
with ferrule;
push-in termination: 0,75 1,5 mm / 18 16 AWG;
Strip length: 9 11 mm / 0.35 0.43 inch;
Numar total de conexiuni: 3;
Numar nivele: 1;
Wiring type: Front-entry wiring;
Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.;
Number of jumper slots: 2;
Latime: 4,2 mm / 0.165 inch;
Inaltime from upper-edge of DIN-rail: 32,9 mm / 1.295 inch;
Adancime: 59,2 mm / 2.33 inch;
Design: horizontal type;
Tip montaj: DIN-35 rail;
Marking level: Center/side marking;
Culoare: white;
Material izolator: Polyamide 66 (PA 66);
Greutate: 7,3;
gTip ambalare: BOX;
Tara de origine: DE;
GTIN: 4055143448222;
Customs tariff number: 85369010000;

Comanda produs 3-conductor shield terminal block; 1.5 mm²; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,50 mm²; white