2-conductor fuse terminal block; with pivoting fuse holder; with additional jumper position; for 5 x 20 mm miniature metric fuse; with blown fuse indication by LED; 30 - 65 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; Push-in CAGE CLAMP®; 2,50 mm²;-Tablouri electrice

Ratings per: IEC/EN 60947-7-3;
Tesiune nominala (III/3): 250;
VTensiune nominala de supratensiune (III/3): 6;
kVCurent nominal: 6,3;
AOperation status indicator: 30 65 V;
Legend (ratings): (III / 3) ?? Overvoltage category III / Pollution degree 3;
Tensiune nominala UL (Use Group B): 65;
VCurent nominal UL (Use Group B): 6,3;
ATensiune nominala UL (Use Group C): 65;
VCurent nominal UL (Use Group C): 6,3;
ATensiune nominala UL (Use Group D): 65;
VCurent nominal UL (Use Group D): 6,3;
ACertificari: UL 1059;
Tehnologie conexiune: Push-in CAGE CLAMP;
Tip actionare: Push-in;
Open Tool Slot;
Connectable conductor materials: Copper;
Nominal cross-section: 2,5 mm;
Solid conductor: 0,25 4 mm / 22 12 AWG;
Solid conductor;
push-in termination: 0,75 4 mm / 18 12 AWG;
Fine-stranded conductor: 0,25 4 mm / 22 12 AWG;
Fine-stranded conductor;
with insulated ferrule: 1 2,5 mm / 18 12 AWG;
Fine-stranded conductor;
with ferrule;
push-in termination: 1 2,5 mm / 18 12 AWG;
Strip length: 10 12 mm / 0.39 0.47 inch;
Numar total de conexiuni: 2;
Total number of potentials: 1;
Numar nivele: 1;
Wiring type: Front-entry wiring;
Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.;
Number of jumper slots: 3;
Latime: 6,2 mm / 0.244 inch;
Inaltime from upper-edge of DIN-rail: 57,6 mm / 2.268 inch;
Adancime: 72,9 mm / 2.87 inch;
Design: horizontal type;
Tip montaj: DIN-35 rail;
Marking level: Center/side marking;
Culoare: gray;
Material izolator: Polyamide 66 (PA 66);
Greutate: 14,6;
gProduct Group: 22 (TOPJOB S);
Tip ambalare: BOX;
Tara de origine: DE;
GTIN: 4050821089124;
Customs tariff number: 85369095990;

Comanda produs 2-conductor fuse terminal block; with pivoting fuse holder; with additional jumper position; for 5 x 20 mm miniature metric fuse; with blown fuse indication by LED; 30 - 65 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; Push-in CAGE CLAMP®; 2,50 mm²;